MIC Output to Encoder only for Flatcast...

coban

New member
Hallo Freunde,

Ich schreibe mein anliegen mal auf Deutsch, da ich nunmal miserabel English kann und hoffe auf Unterst?tzung. :)

Ich hab da mal diverse test's gemacht und erkunde mich im RadioBoss.
Ich br?uchte mal euren rat oder Unterst?tzung, und zwar m?chte ich die Funktion
Mic "Output to Encoder only" benutzen aber da kommt die Mic Signal nicht an.
Ich sehe im RadioBoss das die Mic Signal vorhanden ist aber es wird nicht an die Flatcast Encoder ?bergeben. Mit ausgeschalteter "Output to Encoder only" Funktion hab ich Echo und h?re mich selbst das will ich aber nicht. Habt Ihr eine L?sung f?r mich oder k?nntet Ihr mir einen Weg zeigen wie ich dies umgehen kann.
Funktioniert das nur bei Shoutcast oder mach ich da einen Denkfehler?
Das w?r n?mlich eine super Funktion wenns auch unter Flatcast funktionieren w?rde.

Danke f?r euer Unterst?tzung im voraus.

Gruss Coban


Hello friends,

I write my request in German, because I can miserable English and hope for support. :)

I did some test's and I explore the RadioBoss.
I would need your advice or support, and I want the function
Mic "Output to encoder only" use but because the mic signal does not come on.
I see in the RadioBoss that the Mic Signal is present but it is not passed to the Flatcast Encoder. With switched off "Output to Encoder only" function I have echo and hear myself that I do not want. Do you have a solution for me or could you show me a way how to handle this?
Does that only work with Shoutcast or do I make a mistake?
That would be a great feature if it would work synonymous with Flatcast.

Thank you for your support in advance.
 

Attachments

  • Bildschirmfoto 2019-03-22 um 11.06.27.png
    Bildschirmfoto 2019-03-22 um 11.06.27.png
    19.1 KB · Views: 594
  • Bildschirmfoto 2019-03-22 um 11.13.14.png
    Bildschirmfoto 2019-03-22 um 11.13.14.png
    31.5 KB · Views: 589
  • Bildschirmfoto 2019-03-22 um 11.15.48.png
    Bildschirmfoto 2019-03-22 um 11.15.48.png
    56.8 KB · Views: 606
  • Bildschirmfoto 2019-03-22 um 11.20.13.png
    Bildschirmfoto 2019-03-22 um 11.20.13.png
    125.2 KB · Views: 614
The "Output to encoders only" option will only work if you use RadioBOSS's own streaming capabilities. If you send the stream to some other audio device (as in your case virtual sound card) this option will not work and you will not hear the microphone.
 
if you use RadioBOSS's own streaming capabilities

Ich vermute mal das du hier den "Broadcast" Funktion meinst (siehe Bild).

Darf man den hoffen dass diese "Output to encoders only" Funktion bei den n?chsten RadioBoss Versionen auch f?r "andere Audio Device's" verf?gbar wird?
Oder ist das viel Zuviel aufwand? Den dies w?r wirklich w?nschenswert.

Oder kannst du mir eventuell einen alternativen weg zeigen wie ich das l?sen k?nnte?

Danke f?r dein Antwort und Unterst?tzung.

Gruss Coban



if you use RadioBOSS's own streaming capabilities

I suspect that you mean here the "broadcast" function (see picture).

Is it possible to hope that this "Output to encoders only" function will be available for other Audio Device's at the next RadioBoss version's?
Or is that much too much effort? That would be really desirable.

Or maybe you can show me an alternative way how I could solve that?

Thanks for your answer and support.
 

Attachments

  • Bildschirmfoto 2019-03-22 um 17.10.39.png
    Bildschirmfoto 2019-03-22 um 17.10.39.png
    33.2 KB · Views: 538
coban said:
I write my request in German, because I can miserable English and hope for support.
Off topic:
Schalte zumindest dein RadioBOSS doch auf Deutsch um. :)
 

Attachments

  • w1_002596.jpg
    w1_002596.jpg
    82.7 KB · Views: 515
Danke Basti,

Den teste ich zurzeit schon auf Deutsch (dank dir nat?rlich ;) ), hab nur auf English umgestellt in der hoffnung das ich so eventuell mehr Helfer und unterst?tzer ansprechen kann. :)

Gruss Coban
 
Good Evening everyone
Hallo Coban

hast Du unterdessen eventuell schon eine L?sung gefunden? Ich habe dasselbe Problem leider.
Is there any chance to a solution for this problem?
 
@bd

Nein leider auch keine L?sung gefunden, glaub wir m?ssen den Dimitri irgendwie ?berreden und hoffen das er da einen L?sung anbietet oder als alternative w?rde es mit 2 Sound karten Funktionieren denke ich was ja auch kein sch?ner L?sung ist.
Inspiriert vom Basti's Skype L?sung hab ich auch mit "Virtual Cable" herum experimentiert, den Mic ?ber VB-Adapter geschlauft damit ich dazwischen stumm legen kann aber das funktioniert auch nicht, erzeugt Zuviel Hintergrund rauschen.

Gruss Coban
 
Back
Top