DJSoft.Net
English Deutsch Espanol Русский
RadioBOSS
RadioBOSS makes automating your broadcast to the world, your business or shop professional, simple, affordable, reliable.
Read MoreDownloadBuy Now

Author Topic: Error on Encoders  (Read 353 times)

0 Members and 1 Guest are viewing this topic.

AndyG

  • Posts: 2
Error on Encoders
« on: July 04, 2019, 12:39:01 PM »
Hi I have set up encoders on Radioboss the same ones i was using on Sam Broadcaster but I keep getting this message [E-1] Cannot start broadcasting (output 1) Error -1 (No description)     Lost to what to do next

djsoft

  • Administrator
  • Posts: 9740
    • http://www.djsoft.net
Re: Error on Encoders
« Reply #1 on: July 08, 2019, 08:02:42 AM »
The error usually means that other source is connected to the server already. You can inspect server logs to find out the exact reason.
Dmitry  •  DJSoft.Net Team  •  Email: support@djsoft.net

AndyG

  • Posts: 2
Re: Error on Encoders
« Reply #2 on: July 11, 2019, 04:39:49 PM »
I can turn of auto dj on the main server so nothing is plying and its still the same somthing is not right all it says is [E-1] Cannot start broadcasting (output 1) Error -1 (No description)

djsoft

  • Administrator
  • Posts: 9740
    • http://www.djsoft.net
Re: Error on Encoders
« Reply #3 on: July 12, 2019, 05:46:44 AM »
I can turn of auto dj on the main server so nothing is plying and its still the same somthing is not right all it says is [E-1] Cannot start broadcasting (output 1) Error -1 (No description)
The error message means that the server rejects the connection. RadioBOSS simply states this fact, but it's not the cause. You need to make sure you use the proper encoder settings (server type, address, port, etc) and also make sure there are no other sources connected to the server. If it still does not connect, please inspect server logs - they will contain the reason why the connection can not be made.
Dmitry  •  DJSoft.Net Team  •  Email: support@djsoft.net