jharris171185
Member
Hello,
It would be very nice to be able to set the preview device and mic for voice recorder, so as to not interfere with the broadcast that is actually going out at the time. For example, my input1 is set to my usb console, but that isn't what I want to use for the voice tracking mic. The same console has an "audition" bus, where you can record a separate output that isn't being broadcast, and rather than going out via the USB, it actually outputs to an rca which I then feed in to the mic jack on the computer. So, it would be nice to be able to set completely different sound devices for voice tracking as opposed to what is being used for primary broadcasts. If this is already possible, please let me know how.
It would be very nice to be able to set the preview device and mic for voice recorder, so as to not interfere with the broadcast that is actually going out at the time. For example, my input1 is set to my usb console, but that isn't what I want to use for the voice tracking mic. The same console has an "audition" bus, where you can record a separate output that isn't being broadcast, and rather than going out via the USB, it actually outputs to an rca which I then feed in to the mic jack on the computer. So, it would be nice to be able to set completely different sound devices for voice tracking as opposed to what is being used for primary broadcasts. If this is already possible, please let me know how.