Broadcast Mixdown / Source

[bostonfreeradio]

We're trying to use RadioBoss to handle the broadcast, as an alternative to the loathsome Live365 broadcast application.

We would like to have low-latency monitoring of the Microphone input through the mixer we use-- and currently we have that via the mixing board whose output goes back into our production PC.

It's nice that there's an "output to encoders only" feature-- but that only seems to work when the encoders select that as the input-- ie it doesn't seem to mix down with the Soundcard's "Stereo Mix" that we use to actually broadcast. Are we missing something?

Thanks!

 

[bostonfreeradio]

Perhaps if "Audio mix" could be changed to a mixed input, that would help.

 

[pety]

Perhaps if "Audio mix" could be changed to a mixed input, that would help.

Use a Mixer. With these settings:
https://www.youtube.com/watch?v=sRYccGMjakM&feature=youtu.be

 

[djsoft]

It's nice that there's an "output to encoders only" feature-- but that only seems to work when the encoders select that as the input-- ie it doesn't seem to mix down with the Soundcard's "Stereo Mix" that we use to actually broadcast. Are we missing something?

It should mix MIC with any source that you use for broadcasting (Audio Mix, or any of the inputs). Please confirm that you use the latest RadioBOSS.

 

[pety]

It's nice that there's an "output to encoders only" feature-- but that only seems to work when the encoders select that as the input-- ie it doesn't seem to mix down with the Soundcard's "Stereo Mix" that we use to actually broadcast. Are we missing something?

It should mix MIC with any source that you use for broadcasting (Audio Mix, or any of the inputs). Please confirm that you use the latest RadioBOSS.

bostonfreeradio wants to avoid feedback

 

[djsoft]

It's nice that there's an "output to encoders only" feature-- but that only seems to work when the encoders select that as the input-- ie it doesn't seem to mix down with the Soundcard's "Stereo Mix" that we use to actually broadcast. Are we missing something?

It should mix MIC with any source that you use for broadcasting (Audio Mix, or any of the inputs). Please confirm that you use the latest RadioBOSS.

bostonfreeradio wants to avoid feedback

The "Output to encoders only" should help doing so. The mixer board solution is better, of course.

 

[bostonfreeradio]

The issue is we monitor and drive our control room speakers through our mixer-- so the output of the mixer goes back into the PC via LineIn. If we had more control about which output goes to the broadcast encoder, it would help.

We are using the latest RadioBoss 5.4.0.7

 

[djsoft]

The issue is we monitor and drive our control room speakers through our mixer-- so the output of the mixer goes back into the PC via LineIn. If we had more control about which output goes to the broadcast encoder, it would help.

Can you please specify what needs to be controlled? We can add "Stereo Mix" for any sound card to be as a source for encoders.