DSP on Line Inputs

[Jörg B]

Hallo, I suggest to inplement the feature to use DSP-Effects for the signal wich comes in on the Aux-Inputs of Radioboss. In my Case, i would like to prozess the main Signal wich comes back from my analog mixer and stream it with radioboss. At the moment, i have to do it with an external streaming module because radiobos does not support to insert DSP on the Line Inserts

 

[djsoft]

Thank you for the suggestion! We'll consider adding it in one of the next updates.

 

[Jörg B]

Hallo, I still miss the DSP Effects on Aux Inputs. When i use my hardware Mixer, i can not use DSP for the Processing of the main Signal broadcasted to my audience. That forces me to use a Hardware Compressor and Finalizer. In my studio, no problem. But when we are live on an event, its a big problem.

 

[djsoft]

If you play the input in the main playlist, it will be processed with the DSPs.

 

[Jörg B]

OK, but that is not my target. I want to prozess an incoming signal wich comes from a mixer and than send it on the stream. I have the signals from radioboss on my faders and want to have the whole signal, microphone as well as music, and all other signals coming from the mixer be sent back to radioboss with DSP. I do not want to play only something from a DSP-Input.

 

[derek]

OK, but that is not my target. I want to prozess an incoming signal wich comes from a mixer and than send it on the stream. I have the signals from radioboss on my faders and want to have the whole signal, microphone as well as music, and all other signals coming from the mixer be sent back to radioboss with DSP. I do not want to play only something from a DSP-Input.

I run a mixer in my studio as well. It would be nice to have an option where the mixer is processed instead of the playback from radioboss. The idea is that the music will be processed anyway, but hardware could be used to add any number of microphones, or other sources such as zoom, a phone patch, etc.

 

[djsoft]

I want to prozess an incoming signal wich comes from a mixer and than send it on the stream.

I think for this case RadioCaster can do the job: https://www.djsoft.net/enu/radiocaster_details.htm

 

[djsoft]

I run a mixer in my studio as well. It would be nice to have an option where the mixer is processed instead of the playback from radioboss. The idea is that the music will be processed anyway, but hardware could be used to add any number of microphones, or other sources such as zoom, a phone patch, etc.

At some point in the future we'll add routing control, this will allow configuring, among other things, at what point the DSP is applied.

 

[gregsigisgi]

At some point in the future we'll add routing control, this will allow configuring, among other things, at what point the DSP is applied.

Do you know when? Any plan?

 

[djsoft]

Do you know when? Any plan?

Probably in the next major update - RadioBOSS 7.1.

 

[Jörg B]

It's a pity that the announced audio routing was not implemented in version 7.1. My problem still hasn't been solved. It would be really helpful to have DSP effects for the audio inputs in RadioBOSS, just like for the microphone. Not only for cases where a Line-In source is played in the playlist, but also for processing an incoming signal, for example, from a mixing console. The suggestion to use additional software for this seems quite cumbersome to me.

 

[HMMMM]

Jorg, the DSP will usually add compression; this places an awful affect on the human voice Most good DSP have a route in their software to route around DSP as well . Its ok if you don't use compression but the music sounds not so good.

 

[djsoft]

It's a pity that the announced audio routing was not implemented in version 7.1. My problem still hasn't been solved. It would be really helpful to have DSP effects for the audio inputs in RadioBOSS, just like for the microphone. Not only for cases where a Line-In source is played in the playlist, but also for processing an incoming signal, for example, from a mixing console. The suggestion to use additional software for this seems quite cumbersome to me.

It's planned for the future releases, so will be added at some point.